Diffuse reflectance determination of Malachite Green using polyurethane foam as solid support and sodium dodecylsulfate as counter ion

This paper reports the use of polyurethane foam (PUF) as solid support for diffuse reflectance spectrophotometric determination of Malachite Green (MG), a well known cationic dye used as biocide in the aquaculture industry, using sodium dodecylsulfate (SDS) as a counter ion. The method was based on the formation of an ionic-pair between the dye and the anionic surfactant SDS, which was sorbed onto PUF surface, where the diffuse reflectance was measured at 635 nm. Several parameters that could affect the performance of the system were evaluated. As expected, the SDS concentration presented strong influence on the analytical signal because the PUF was able to retain only the ionic-pair. The pH influenced the analytical signal, which was more intense in the acidic/neutral range, while the ionic strength only influenced the kinetic of the MG (as MG-SDS ionic-pair) sorption. The methodology was employed in the determination of MG in river waters and a recovery test was performed to test the accuracy of the procedure. Recovery percentages between 98.7 and 107% were observed when 60 or 80 μg L(-1) of MG were added to the samples.     

Experimental and theoretical studies of the conformational structures of the mixed clusters of 1-cyanonaphthalene with water

A concerted experimental (mass-selective, double-resonance laser spectroscopic technique) and theoretical (correlated quantum chemistry calculation) study of hydrogen-bonded clusters of 1-cyanonaphthalene (CNN) with water has been carried out to probe geometrical structures of the conformational isomers. The structures of the two low-energy conformers of CNN-H2O and CNN-(H2O)2, calculated at the MP2/cc-pVDZ level of theory, are consistent with the mass-selective infrared-ultraviolet double-resonance spectra and the partially resolved rotational band contours of the S1 <-- S0 origin bands. The facile loss of a neutral water molecule from the cluster ion of CNN-(H2O)2, relative to that of CNN-H2O, is in accord with the proposed structures of the clusters.     

A 4D wave packet study of the CH3I photodissociation in the A-band. Comparison with femtosecond velocity map imaging experiments

The time-resolved photodissociation dynamics of CH(3)I in the A-band has been studied theoretically using a wave packet model including four degrees of freedom, namely the C-I dissociation coordinate, the I-CH(3) bending mode, the CH(3) umbrella mode, and the C-H symmetric stretch mode. Clocking times and final product state distributions of the different dissociation (nonadiabatic) channels yielding spin-orbit ground and excited states of the I fragment and vibrationless and vibrationally excited (symmetric stretch ν(1) and umbrella ν(2) modes) CH(3) fragments have been obtained and compared with the results of femtosecond velocity map imaging experiments. The wave packet calculations are able to reproduce with very good agreement the experimental reaction times for the CH(3)(ν(1), ν(2))+I*((2)P(1/2)) dissociation channels with ν(1) = 0 and ν(2) = 0,1,2, and also for the channel CH(3)(ν(1) = 0, ν(2) = 0)+I((2)P(3/2)). However, the model fails to predict the experimental clocking times for the CH(3)(ν(1), ν(2))+I((2)P(3/2)) channels with (ν(1), ν(2)) = (0, 1), (0, 2), and (1, 0), that is, when the CH(3) fragment produced along with spin-orbit ground state I atoms is vibrationally excited. These results are similar to those previously obtained with a three-dimensional wave packet model, whose validity is discussed in the light of the results of the four-dimensional treatment. Possible explanations for the disagreements found between theory and experiment are also discussed.     

Silica-Zirconia Coatings Produced by Dipping and EPD from Colloidal Sol–Gel Suspensions

SiO₂-ZrO₂ sols have been prepared via acid catalysis using a commercial colloidal suspension of zirconia and two silica alkoxides; tetraethoxysilane (TEOS) and methyltriethoxysilane (MTES). Suspensions with 10, 15 and 25-mol% of ZrO₂ were prepared. The stability of the suspensions was followed by rheological measurements showing that the amount of water incorporated with the colloidal suspension is the factor that limits the maximum ZrO₂ content. Coatings have been prepared by dipping using the suspensions up to 25-mol% ZrO₂ onto glass-slides at different withdrawal rates. EPD process has been used to prepare coatings onto stainless steel AISI 304 using the suspension with 25-mol% ZrO₂ at different pHs. The parameters associated with the EPD process (current density, electric field, potential and deposition time) have been evaluated. The critical thickness for a ZrO₂ addition of 25-mol% was 0.8 μm and it increased for diminishing ZrO₂ content.     

Quantum theory of atoms in molecules analysis on the conformational preferences of vinyl alcohol and related ethers

Vinyl alcohol, methyl vinyl ether, and tert-butyl vinyl ether were studied within the framework of the quantum theory of atoms in molecules at the B3LYP/6-311++G(2d,2p) level. Local and integrated properties of the charge density indicate that the anti conformational preference of the tert-butyl derivative is not due to a differing resonance contribution with regard to the less bulky vinyl ethers but to steric effects. There is a small delocalization of charge density, either total or pi, between oxygen and the terminal vinyl carbon, which does not support the resonance picture of vinyl compounds.     

Easy access to bio-inspired osmium(II) complexes through electrophilic intramolecular C(sp2)-H bond cyclometalation

Mild electrophilic C(sp2)-H cyclometalation of 2-phenylpyridine and N,N-dimethylbenzylamine by the chloro-bridged osmium(II) dimer [OsCl(micro-Cl)(eta6-C6H6)]2 in acetonitrile affords cyclometalated pseudotetrahedral OsII complexes [Os(C approximately N)(eta6-C6H6)(NCMe)]PF6 (C approximately N=o-C6H4py-kappa C,N (2) and o-C6H4CH2NMe2-kappa C,N (5), respectively) in good to excellent yields. The cyclometalation reactions are super sensitive to the nature of an external base. Sodium hydroxide is essential for cyclometalation of 2-phenylpyridine, but NaOH retards metalation of N,N-dimethylbenzylamine, the tertiary amine being self-sufficient as a base. Further reactions of compounds 2 and 5 with 1,10-phenanthroline or 2,2'-bipyridine (N approximately N) lead to the substitution of the eta6-bound benzene to produce octahedral species [Os(C approximately N)(N approximately N)(NCMe)2]PF6 or [Os(C approximately N)(N approximately N)2]PF6 in MeCN or MeOH as solvent, respectively. The cis configuration of the MeCN ligands in [Os(C approximately N)(phen)(NCMe)2]PF6 has been confirmed by an X-ray crystallographic study. Electrochemical investigation of the octahedral osma(II)cycles by cyclic voltammetry showed a pseudoreversible MIII/II redox feature at (-50)-(+109) and 190-300 mV versus Ag/AgCl in water and MeCN, respectively. As a possible application of the compounds, a rapid electron exchange between the reduced active site of glucose oxidase enzyme from Aspergillus niger and the electrochemically generated OsIII species has been demonstrated. The corresponding second-order rate constants cover the range (0.7-4.8)x10(6) M(-1) s(-1) at 25 degrees C and pH 7.     

Rapid mutation detection in complex genes by heteroduplex analysis with capillary array electrophoresis

Mutational analysis of large multiexon genes without prevalent mutations is a laborious undertaking that requires the use of a high-throughput scanning technique. The Human Genome Project has enabled the development of powerful techniques for mutation detection in large multiexon genes. We have transferred heteroduplex analysis (HA) by conformation-sensitive gel electrophoresis of the two major breast cancer (BC) predisposing genes, BRCA1 and BRCA2, to a multicapillary DNA sequencer in order to increase the throughput of this technique. This new method that we have called heteroduplex analysis by capillary array electrophoresis (HA-CAE) is based on the use of multiplex-polymerase chain reaction (PCR), different fluorescent labels and HA in a 16-capillary DNA sequencer. To date, a total of 114 different DNA sequence variants (19 insertions/deletions and 95 single-nucleotide substitutions - SNS) of BRCA1 and BRCA2 from 431 unrelated BC families have been successfully detected by HA-CAE. In addition, we have optimized the multiplex-PCR conditions for the colorectal cancer genes MLH1 and MSH2 in order to analyze them by HA-CAE. Both genes have been amplified in 13 multiplex groups, which contain the 35 exons, and their corresponding flanking intronic sequences. MLH1 and MSH2 have been analyzed in nine hereditary nonpolyposis colorectal cancer patients, and we have found six different DNA changes: one complex deletion/insertion mutation in MLH1 exon 19 and another five SNS. Only the complex mutation and one SNS may be classified as cancer-prone mutations. Our experience has revealed that HA-CAE is a simple, fast, reproducible and sensitive method to scan the sequences of complex genes.     

Monitoring large scale wine fermentations with infrared spectroscopy

Negative effects on wine quality and productivity caused by stuck and sluggish fermentations can be reduced significantly, if such problems are detected early through periodic chemical analysis. Infrared spectroscopy (IR) has been used successfully for monitoring fermentations, since many compounds can be measured quickly from a single sample without prior treatment. Nevertheless, few applications of this technology in large scale winemaking have been reported, and these do not cover the entire fermentation from must to finished wine. In this work, we developed IR calibrations for analyzing the fermenting must at any stage of fermentation. The calibration model was obtained with multivariable partial least squares and proved effective for analyzing Cabernet Sauvignon fermentations for glucose, fructose, glycerol, ethanol, and the organic acids; malic, tartaric, succinic, lactic, acetic, and citric. Upon external validation we found an average relative predictive error of 4.8%. Malic acid showed the largest relative predictive error (8.7%). In addition, external validation found that insufficient data for these calibrations made the analysis of fermenting musts using other grape varieties less reliable.     

Spectroscopic characterization and Langmuir-Blodgett films of a novel azopolymer material

Spectroscopic characterization and fabrication of Langmuir and Langmuir-Blodgett (LB) films of an azopolymer-pyridine (PAzPy) are reported. UV-visible absorption and fluorescence spectra, Fourier transform infrared (FTIR) spectra, and Raman spectra were recorded. The vibrational assignment of the observed spectra is supported by a complete geometry optimization, followed by vibrational frequency and intensity computations of both the trans and cis forms of the monomer (AzPy) using density functional theory at the B3LYP 6-31G(d,p) level of theory. Langmuir monolayers of the polymer (PAzPy) were formed at the water-air interface, and LB films of high quality were formed onto solid substrates. The polymer LB films were investigated by surface-enhanced Raman scattering.     

Reversible (de)protonation-induced valence inversion in mixed-valent diiron(II,III) complexes

The coupling of electron and proton transfers is currently under intense scrutiny. This Communication reports a new kind of proton-coupled electron transfer within a homodinuclear first-row transition-metal complex. The triply-bridged complex [Fe(III)(μ-OPh)(μ(2)-mpdp)Fe(II)(NH(2)Bn)] (1; mpdp(2-) = m-phenylenedipropionate) bearing a terminal aminobenzyl ligand can be reversibly deprotonated to the anilinate complex 2 whose core [Fe(II)(μ-OPh)(μ(2)-mpdp)Fe(III)(NHBn)] features an inversion of the iron valences. This observation is supported by a combination of UV-visible, (1)H NMR, and M?ssbauer spectroscopic studies.